Timken Bearing
Timken Bearings extend the working life of wheels, pulleys, and other rotating parts by reducing friction and enabling parts to move smoothly. Also called slewing rings or slewing bearings, they are installed between two surfaces to keep parts aligned and support axial and radial loads. Axial (thrust) bearings support loads parallel to the axis of the shaft, such as those exerted by a table supporting a weight. Radial bearings support rotating wheels and other applications where the force of the load is perpendicular to the shaft.
Ball bearings are used with applications that have high axial loads and low-to-moderate radial loads. Mounted bearings (bearing units) have a bearing inside a housing unit to ensure a secure fit and mount. Sleeve and clip bearings support high loads, have no moving parts, and require lubricant to allow the shaft to turn smoothly. Spherical bearings and spherical rod ends are used on articulating joints and when the bearing must accommodate for axial misalignment.
- 70 mm x 125 mm x 31 mm Timken X32214/Y32214 tapered roller bearings
- 28 mm
- 2,5 kg / Weight
- 63,5 mm x 127 mm x 36,512 mm Timken HM813842/HM813811 tapered roller bearings
- Timken
- HM813842/HM813811
- Timken WJ-344016 needle roller bearings
- 25,000 mm
- 21,000 mm
- Timken K32X40X25H needle roller bearings
- Timken
- K32X40X25H
- 120 mm x 190 mm x 32 mm Timken 124W deep groove ball bearings
- 9110 lb
- Cast Iron
- 431,8 mm x 565,15 mm x 44,45 mm Timken 80170/80222 tapered roller bearings
- Lubrication Fitting
- Round
- 100 mm x 180 mm x 34 mm Timken 220WD deep groove ball bearings
- RNA 4832
- 1,85 Kg
- Timken T176 thrust roller bearings
- RNA 4832
- 1,85 Kg